RAK Poxy 750HB Zinc Rich Primer

RAK Poxy 750HB Zinc Rich Primer is a two component, amino polyamide cured, anticorrosive, high molecular weight, premium quality Zinc pigmented epoxy primer. It has very good hardness, adhesion, fast drying and abrasion resistant properties. It is specially formulated to use as a primer coat or intermediate coat on metal surfaces in highly corrosive atmosphere and where long durability is required. Suitable for freshly prepared carbon & stainless steel, aluminium, galvanized steel.

Typical use

Recommended as an anti-corrosive epoxy coat for structured steel, tanks, Refineries, power plants, bridges and equipments.

Product data

Property	Description
Gloss level (GU 60 °)	Matt
Solids by Volume	54 ± 2 %
Flash point	26°C
Density	2.3 kg/ll
VOC-EU	425 g/l

The provided data is typical for factory produced products, subject to slight variation depending on colour. All data is valid for mixed paint.

Gloss description: According to RAK Performance Coatings' definition.

Film thickness per coat

Typical recommended specification range

Dry film thickness 75 - 150 μm
Wet film thickness 139 - 278 μm
Theoretical spreading rate 7.2 - 3.6 m²/l

Practical coverage is totally depending up quality and nature of the substrate, weather and application DFT of the paint.

How To Apply

Follow these steps for
best results and a professional finish.

Application Methods

Spray : Use Air or Airless Spray Brush : Use for corners and areas difficult to paint with roller

Product Mixing

RAK Poxy 750HB Zinc Rich Primer Base – 3 Parts RAK Poxy 750HB Zinc Rich Primer Hardener – 1 Parts

Thinner/Cleaning solvent

Thinner: RAK Poxy Thinner Airless Spray / Brush : 5-10% thinner is recommended as per need. Conventional Air Spray : 15-20% thinner is recommended as per need.

RAK Poxy 750HB Zinc Rich Primer